Svsi N8001 Bedienungsanleitung PDF herunterladen

Distribution | Switching | Recording | Windowing | Wall Processing | Control

Congratulations on the purchase of your Conductor N8001

Networked AV Controller – part of SVSi's family of Networked

AV products. Each N8001 ships with dual IP addresses of

192.168.1.99 with netmask 255.255.255.0 and 169.254.10.99

with netmask 255.255.0.0. The first IP address is intended as

the outward facing IP address for LAN or WAN control. The

latter IP address is the default IP address range with which all

SVSi Networked AV encoders and decoders ship.

The N8001 requires only the included power adapter and a

single network connection to allow up to 5 simultaneous users

the ability to configure, set-up, and control up to 50 Networked

360B Quality Circle Suite 200, Huntsville, AL 35806

www.svsiav.com

800DOCB8001QSREV1.3

N8001 QUICK START

7.75”

7.75”

1.4”

AV devices. This device functions as a virtual matrix switch for SVSi encoders and decoders as well as a touch-panel editor for simple

quick graphical control of networked AV installation. SVSi offers free Conductor Mobile apps for iOS or Android software that manage the

N8001 to render custom control panels. Visit http://svsiav.com/support/resources/software to download.

This unit will automatically boot upon power application. Please allow approximately 1-minute for boot-up. Once booted, log onto a

web-browser and type the IP address “192.168.1.99” into the URL bar. The device log-in page should be displayed. The default username

is “admin” with default password of “password”. These can be changed after initial login. After successful log-in, click on the

[Admin->Attached Units] dropdown menu to discover all networked AV devices on the video network. These units will show in Matrix page.

For technical support, please visit http://support.svsiav.com or contact SVSi at 256.461.7143.

Distribution | Switching | Recording | Windowing | Wall Processing | Control

Congratulations on the purchase of your Conductor N8001

Networked AV Controller – part of SVSi's family of Networked

AV products. Each N8001 ships with dual IP addresses of

192.168.1.99 with netmask 255.255.255.0 and 169.254.10.99

with netmask 255.255.0.0. The first IP address is intended as

the outward facing IP address for LAN or WAN control. The

latter IP address is the default IP address range with which all

SVSi Networked AV encoders and decoders ship.

The N8001 requires only the included power adapter and a

single network connection to allow up to 5 simultaneous users

the ability to configure, set-up, and control up to 50 Networked

360B Quality Circle Suite 200, Huntsville, AL 35806

www.svsiav.com

800DOCB8001QSREV1.3

N8001 QUICK START

7.75”

7.75”

1.4”

AV devices. This device functions as a virtual matrix switch for SVSi encoders and decoders as well as a touch-panel editor for simple

quick graphical control of networked AV installation. SVSi offers free Conductor Mobile apps for iOS or Android software that manage the

N8001 to render custom control panels. Visit http://svsiav.com/support/resources/software to download.

This unit will automatically boot upon power application. Please allow approximately 1-minute for boot-up. Once booted, log onto a

web-browser and type the IP address “192.168.1.99” into the URL bar. The device log-in page should be displayed. The default username

is “admin” with default password of “password”. These can be changed after initial login. After successful log-in, click on the

[Admin->Attached Units] dropdown menu to discover all networked AV devices on the video network. These units will show in Matrix page.

For technical support, please visit http://support.svsiav.com or contact SVSi at 256.461.7143.

1

N8001 QUICK START 1

Inhaltsverzeichnis

Seite 1 - N8001 QUICK START

Distribution | Switching | Recording | Windowing | Wall Processing | ControlCongratulations on the purchase of your Conductor N8001 Networked AV Contr

Kommentare zu diesen Handbüchern

Keine Kommentare